Honeysuckle Hair Mist Recipe: Why Alcohol Comes First
The best honeysuckle hair mist is the simplest one: absolute, ethanol, a fine-mist bottle, and nothing else. It smells like a hedge in the evening, it dries on its own, and it avoids the two things that make water-based mists fussy, which are a solubilizer and a preservative.
Honeysuckle Absolute
Our own Honeysuckle Absolute, in sizes from 0.5 oz to bulk.
From $13.99
Shop Now →Why we start with alcohol
An absolute is an oil-like material, so in water it separates unless a solubilizer holds it in place, and the right amount depends on the product you buy. Water also brings microbes into play. The FDA lists contaminated water and an ineffective preservation system among the ways microbes get into cosmetics (FDA, Microbiological Safety and Cosmetics). That page covers cosmetics in general, but it is a good reason to leave a water-based mist to a cosmetic chemist or your preservative supplier's guidance. Ethanol sidesteps all of it. Buy ethanol sold for perfumery or cosmetic use from a craft or supply shop, and ask which denaturant it contains. We sell only the absolute.
How much to use
It helps to picture what you want before you start. A good scented mist is a light veil: you spritz, walk through it, and a faint sweet note stays near you for a little while. It should not smell like a florist's cold room. That is why we keep the dose low, and why a small bottle is plenty for a first batch.
A mist lands on hair, neck, face and ears, and the dose is less controlled than a drop of body oil. Our dilution guidance for skin is 0.5% to 2% in a carrier oil with a patch test first. For a mist we recommend 0.2% to 0.5%, at or below the floor of that range, starting at 0.2%. That is our recommendation for this use, not a published limit. If you sell what you make, check IFRA standards for your own formulation.
Drops are too coarse at this level, so make the 10% stock described in our dilution walkthrough and weigh it into the bottle:
| Target (100 g batch) | 10% stock | Ethanol |
|---|---|---|
| 0.2% | 2.0 g | 98.0 g |
| 0.3% | 3.0 g | 97.0 g |
| 0.5% | 5.0 g | 95.0 g |
The sums are simple: 0.3% of 100 g is 0.3 g of absolute, which is 3.0 g of a 10% stock, and ethanol makes up the balance. Halve everything for a 50 g first batch. A little absolute goes a very long way here; a 0.5 oz bottle holds roughly 14.6 g at the density on our Certificate of Analysis (0.989), enough for around 48 batches of 100 g at 0.3%.
Making and spraying it
Choose your bottle with a little care. A glass bottle with a fine mist sprayer feels nicer to use than a coarse one, and a small size, say 30 to 50 ml, means you finish it while it is still fresh. Rinse the bottle with a little ethanol and let it dry before you fill it, so nothing from a previous life ends up in your mist.
- Weigh the empty glass spray bottle, tare, and add the stock.
- Add ethanol up to the total weight, cap and swirl.
- Label it with the percentage, the date and the lot number of the absolute.
- Patch test a little on the inner forearm and wait a day.
- Try a hidden strand of hair before the whole head, especially if your hair is dyed or treated, and ask your stylist if you are unsure how a scented mist will behave on it.
Ethanol is flammable, and a mist is a fine cloud of it. The NIOSH Pocket Guide lists a flash point of 55 F, explosive limits of 3.3% to 19% in air, and a Class IB flammable-liquid rating (NIOSH Pocket Guide to Chemical Hazards: Ethyl alcohol). In practice that means spraying in a ventilated room, away from flames and cigarettes, letting it dry before using a hot styling tool, and storing it somewhere cool. Spray away from faces, keep it away from eyes, children and pets, and never spray it on an animal.
Store the finished mist tightly capped, cool and out of sunlight, and keep the sprayer shut so the ethanol does not evaporate. Make a new batch if it turns cloudy or smells different, and avoid topping up an old bottle, because the percentage then stops being the one you calculated.
Little habits that make it nicer to use
Hold the bottle a hand's width or more from your hair and give it one or two quick sprays, then wait a moment before a third. A mist feels strongest in the first minute, while the ethanol is still evaporating, and settles into something softer after that. If you want a stronger scent, make a second bottle at the next step up in the table rather than spraying more of the first. Keep a small bottle by the door, since this is the kind of scent people tend to reach for on the way out.
Run a few pumps of plain ethanol through a new sprayer before you fill it. A new nozzle sometimes needs priming, and it is better to find that out before your absolute goes in.
A mist is a fragrance and should stay one. Keep your wording about scent, not about what it does for hair. If you want a leave-in with no alcohol at all, the oil route in our honeysuckle hair oil post needs no preservative, and the carrier comparison helps you choose the oil.
One spritz, a minute to dry, and you carry a little evening garden with you.
Honeysuckle Absolute
Honeysuckle Absolute from our own shop, in sizes from 0.5 oz to bulk.
From $13.99
Shop Now →Sources & Further Reading
- FDA. Microbiological Safety and Cosmetics (content current as of 10/15/2024). fda.gov
- CDC NIOSH. NIOSH Pocket Guide to Chemical Hazards: Ethyl alcohol. cdc.gov/niosh/npg/npgd0262