How to Make a 10% Honeysuckle Stock by Weight

A drop of thick honeysuckle absolute is a different size every time you squeeze the dropper. Cold bottle, warm bottle, quick drip, slow drip, and you have changed the dose by a third without noticing. A scale ends the guessing, and a 10% stock made by weight is the most useful thing a perfume hobbyist can keep next to a bottle of absolute.

Honeysuckle Absolute bottle

Honeysuckle Absolute

Our own Honeysuckle Absolute, in sizes from 0.5 oz to bulk.

From $13.99

Shop Now →

Why a stock beats the neat bottle

Neat honeysuckle absolute is dense and sticky, and on a smelling strip it tells you a little less than you would hope about how it will read in a finished perfume. A 10% dilution in ethanol is easier to handle, easier to compare from one session to the next, and far more forgiving to measure. It is for smelling and for building perfume trials, so keep it off your skin. Our guidance for skin is 0.5% to 2% of the absolute in a carrier oil, patch test first, and a 10% ethanol stock is a different, much stronger preparation.

If you do want to think in drops, the arithmetic is simple. The Certificate of Analysis we publish for one batch lists a relative density of 0.989, so 1 ml weighs about 0.989 g. At the common convention of about 20 drops per ml, one drop is roughly 0.05 g. Treat that as a planning number only, since droppers vary and a chilled absolute pours in bigger, slower drops. Warm the bottle in your hand for a minute, as the absolute thickens in the cold, and then weigh instead.

The numbers

Ten percent by weight means one part absolute to nine parts ethanol, by mass. Ethanol has a specific gravity of 0.79, so divide the grams of ethanol by 0.79 if you would rather measure it in millilitres.

Finished stockAbsoluteEthanol (g)Ethanol (ml)
10 g1.0 g9.011.4
25 g2.5 g22.528.5
50 g5.0 g45.057.0

The trick that saves the most frustration is to hit the ratio, not the target weight. Put a clean vial on the scale and tare it, add absolute until you are close to the amount you want, and write down the real figure. Then add nine times that mass of ethanol. If you landed on 1.14 g of absolute, add 10.26 g of ethanol and you have 11.40 g of a true 10% stock. Nothing gets poured back and forth, and no film of absolute is lost on the glass.

A 0.5 oz bottle holds about 14.6 g at that density, which is plenty for a handful of 10 g stocks. For judging a single absolute, one small batch is all you need. If you go through more, see our bulk sizes and our guide to buying honeysuckle absolute in bulk.

Choosing the ethanol

We sell the absolute only, so the ethanol comes from a perfumery or chemical supplier. The stronger the better, because a drinks-strength spirit at 40% alcohol is mostly water by its own label and may leave an absolute cloudy. If a stock turns hazy, a higher-proof ethanol is the first thing to try. If you buy denatured alcohol, ask the supplier which formula and denaturant is in the bottle and whether it suits personal fragrance work, because the federal list of authorized denaturants in 27 CFR 21.151 names several. Who may buy alcohol, and how much, varies by state, so the supplier is the one to ask.

Respect the flammable part

Ethanol is more flammable than most people expect. The NIOSH Pocket Guide gives it a flash point of 55 F (about 13 C) and explosive limits of 3.3% to 19% in air, and classes it as a Class IB flammable liquid. A 10% stock is roughly 90% ethanol, so the stock carries the same cautions. Keep candles, hotplates and any open flame out of the room while you pour, work in small amounts, cap the vial straight afterwards, and do not leave it in a hot car.

A tidy bench helps

Small preparations go better when the surface is clear. Lay down a sheet of paper, keep a tissue handy for wiping the bottle neck, and label the vial before you pour anything into it. A clean neck also stops the cap from sticking to the thread, which matters with a thick absolute.

Judging the stock over a day

A good smelling routine is simple enough to fit into an afternoon, and it works best if you write things down.

  1. Dip one strip in the neat absolute and another in the 10% stock, and label each with the material and the time.
  2. Smell both straight away, then at 15 minutes, an hour and four hours, and once more the next morning. Your own notes will be worth more than anyone's description.
  3. Make a 1% step from the stock: 1.0 g of stock plus 9.0 g of ethanol gives 10.0 g holding 0.1 g of absolute. A 1% strip is much closer to how honeysuckle sits in a finished perfume.

Make the 1% from the stock, not straight from the bottle. A scale that reads to 0.01 g can be off by 0.005 g from rounding, which is 5% of a 0.10 g dose but only half a percent of a 1.0 g dose. Two steps keep the error small.

Label every vial with the material, the percentage, the date and the batch code from the bottle. The batch on our published certificate is HONLUUUNUNC007A, and a later bottle may carry a different code, so read the one you hold. Ethanol creeps out through a loose cap, which slowly raises the strength of the stock, so a half-empty vial that has sat for months is no longer the 10% you made.

When you are ready to turn a stock into something wearable, the rollerball recipe and the hair mist both build on stocks like this one, and choosing a first size helps you plan how much absolute you will actually go through.

Honeysuckle Absolute bottle

Honeysuckle Absolute

Honeysuckle Absolute from our own shop, in sizes from 0.5 oz to bulk.

From $13.99

Shop Now →

Sources & Further Reading