Honeysuckle Cold Process Soap: A Small Test Batch

Honeysuckle is a delicate floral, and soap is a harsh place for one. Lye, heat and weeks of curing all work against a soft scent. So this recipe starts small: a 100 g test batch, with the full-size sheet beside it for when you know the scent survives.

Honeysuckle Absolute bottle

Honeysuckle Absolute

Our own Honeysuckle Absolute, in sizes from 0.5 oz to bulk.

From $13.99

Shop Now →

The batch sheet

The oils are 60% olive, 30% coconut and 10% shea, with a 5% superfat. The saponification values are the sodium hydroxide figures from Certified Lye's chart, which are averages compiled in 2006: olive 0.1353, refined coconut 0.1910 and shea 0.1296 grams of lye per gram of oil (Certified Lye, Using Lye to Make Soap). The superfat and the 33% lye solution are our choices.

Ingredient100 g test500 g batchWorking
Olive oil60 g300 g300 x 0.1353 = 40.59 g lye
Coconut oil30 g150 g150 x 0.1910 = 28.65 g lye
Shea butter10 g50 g50 x 0.1296 = 6.48 g lye
Lye at 5% superfat14.4 g71.9 g75.72 g full lye x 0.95
Water29.2 g146 glye is 33% of the solution
Honeysuckle absolute1 g5 g1% of oil weight

As a check, 71.9 g lye in 146 g water is 33.0%. Because saponification values are averages, rerun the numbers through a lye calculator with your supplier's values before you weigh any lye. One gram of absolute is about a millilitre at the density on our Certificate of Analysis (0.989), and on a scale that reads to 0.01 g it is easy to weigh. In the finished test bar that is about 0.7%, inside our 0.5% to 2% skin guidance.

Why 1%, and where you could go

Soap Queen's blog notes that up to 0.8 oz of fragrance or essential oil per pound of soap gives a strong scent, which is about 5% by weight, within each material's IFRA limit (Soap Queen, How to Prevent Scent Fading in Soap, 25 March 2025). At 5%, a 500 g batch would use 25 g of absolute, which is a lot of a precious material. We suggest 1% for a first batch: it is economical, it sits inside our skin guidance, and it leaves room to go up. If you sell soap, check the IFRA limit for your own rinse-off product, since limits are set per material.

The same post suggests anchoring a light scent with a deeper, earthier one, which is sensible reasoning for a soft floral like this. Our neroli accord and blending article cover partners. Whether the absolute speeds trace, changes the bar's colour or fades in cure is what the test batch will show, so a control bar helps.

Lye comes first

Sodium hydroxide is the dangerous ingredient here, not the absolute. The NIOSH Pocket Guide lists it as burning to eyes, skin and mucous membranes, with a ceiling exposure limit of 2 mg/m3, and says contact with water can produce enough heat to ignite combustibles. It attacks aluminum, tin and zinc, so use stainless steel, glass or heat-safe plastic (NIOSH Pocket Guide to Chemical Hazards: Sodium hydroxide).

The steps

  1. Weigh the lye and water separately, pour the lye into the water, stir until clear and let it cool.
  2. Melt the coconut oil and shea, add the olive oil, and bring the oils to a comfortable working temperature.
  3. Warm the absolute bottle in your hand so it pours, and weigh it into a small cup.
  4. Combine lye solution and oils, stick-blend to light trace, stir in the absolute and pour.
  5. Soap in gel phase can reach about 180 F, and Soap Queen advises avoiding gel with low flash point scents. We do not list a flash point for the absolute, so keep the bars in a cool place without insulating them.

Make a second 100 g batch with no absolute and compare the two at unmolding, after a week and as they cure: colour, scent, how they lather. Note which one reached light trace first, and decide beforehand what result means you should buy more, such as still smelling honeysuckle in the hand after the bar has aged. Patch test a small area before you give anyone a bar (the skin basics guide covers it).

While the bars cure

Curing is the slow part, so make it a habit to sniff your test bar on day one, after a week and again as it ages. Write down what you notice. Keep the bars on a rack in a cool, airy place out of direct sun, with space around each one. It is hard to wait, but the notes you collect now will make the next batch easier to plan.

If soap is not the right start

If you want a loud scent in a high-volume bar, an absolute at 1% will be gentle; the arithmetic is in our soap and body care guide. For an easier first try without lye, melt and pour is a friendly alternative, and anyone selling bars should read the labeling guide. Oils, lye and molds come from a soap-supply shop; we sell only the absolute.

Make the small bar first, let it cure, and let your nose decide what comes next.

Honeysuckle Absolute bottle

Honeysuckle Absolute

Honeysuckle Absolute from our own shop, in sizes from 0.5 oz to bulk.

From $13.99

Shop Now →

Sources & Further Reading